My quilt of yellow hexagons has continued to grow over the past ten days, and I’m excited to share the newest blocks with you today. (You can check out the first ten blocks here.) These blocks are constructed using fabrics mostly from my stash, and my mom contributed some of her scraps and yellow fabrics from her stash to the project this week.
This quilt is mostly improv, but there is some structure within the overall design. Before beginning block construction, I used AutoCad to determine a very rough direction of the overall quilt design. I wanted the hexagons to remain fairly small, but have enough space to include some interesting piecing. There is also a chance that I will enter this quilt into a few shows, so it was important to make sure that the overall quilt size would work with a few potential categories. Given these parameters, the ideal hexagon size was 4″ across from side to side.
The quilt layout will have 95 full hexagons and ten half hexagons. Each day of the project will consist of one full hexagon or two half hexagons.
Most of the hexagons in this quilt are improv pieced into a larger piece of fabric and then cut into their final shape using a template. The templates are drafted with the 1/4″ seam allowances and printed onto card stock. The inner line on the templates indicates the stitching line, and I punched a very small hole at each corner to make them easy to mark the points for the final assembly.
Here are blocks 1-20! The layout will evolve throughout the 100 days, and it is exciting to see how the quilt is coming together.
I hope you’ll follow along with me as I construct these 100 blocks in 100 days! Here’s the previous post and some of what’s coming up:
- Fabric Choices
- Improv piecing
- Adding 1/8″ wide slivers to the design
- Fussy cutting
- Foundation paper piecing hexagons
- Using the elements of design in a monochrome palette
- Maintaining Consistency