Vinyl Front Tula Pouch

For the second year, one of the sewing groups I belong to did a swap.  This swap has a twist:  Each person brings a fat quarter of a favorite fabric from their stash to put in a bag.  Then, we all take turns pulling out a piece of fabric and guess who it belongs to.  We are a small group, so we are typically pretty successful in guessing the owner of the fabric.  We each take the fabric away and come back a couple meetings later with an item made from the fabric we pulled from the bag to give back to the original person.

Tula Vinyl Pouch front

I pulled this cute Tula Pink cat print from the bag of fat quarters.  It happened to be a fabric that I love enough to own, too!  The person who brought the fabric enjoys hand applique and embroidery, so I thought she may like a bag that will keep all of her pieces flat and visible until it is their turn to be secured to the block.

I used a fairly heavy, clear vinyl for the front of the pouch. The primary fabric is the cat print, and for the back of the pouch, I chose to make a nine patch from a charm pack from the same Tula Pink fabric line.  I sandwiched and quilted the fabric layers with a piece of soft and stable to make sure the pouch would lay flat while maintaining flexibility.

Tula Vinyl Pouch back

The binding is also from that same line of prints.  I machine stitched it to the front and folded it around to the back for hand stitching.  This allowed for hand finishing on the fabric portion of the pouch.  The bag finishes a bit over 13″ square, so a lot of quilt blocks could actually lay flat in the pouch.  I wish I had made one for myself when I was in a couple of bees- it would have been perfect to transport blocks!

Canvas Gift Bags

As I was wrapping gifts on Saturday it occurred to me that a reusable bag would make more sense for several of the items I was about to wrap.  I don’t usually purchase a large amount of any single fabric, but I did have some plain canvas on hand.  Since the canvas has more body and substance to it than a standard quilting cotton, it didn’t even require a full lining.

Drawstring Gift Bag

The Christmas-y fabrics I had on hand were also very limited, but I did have enough to use as a facing on the top of the bag to add a bit of color and create the drawstring casings.  Awhile back I had ordered 3/8″ grosgrain ribbon in a variety of colors to have on hand for various projects, and it worked perfectly for this project.  It was purchased from cheeptrims.com (not an affiliate) which has great prices, but does have a minimum order, so you may want to pool orders with a friend.

Drawstring Bag Top View

To calculate the size of each bag, I loosely wrapped a fabric measurement tape around the gift, leaving a few inches excess to allow for seam allowance and ease.  Half of this measurement was the width of the bag.  For the height I also wrapped the measuring tape around the gift vertically and divided the measurement in half.  I made sure to add 7-8″ to each half to allow for the gathering at the top of the bag and for the ruffle at the top.  The corners are also boxed out to give the bag a bit more dimension.

These bags work great, and I’ll be making more to gift in future years!

Open-Out Box Pouches

The Open-Out Box Pouch was the star of a recent sew-in I participated in.  This adorable pattern is designed by Comfort Stitching.  We came to the sew-in with the bag pieces pre-cut and interfacing pressed into place, so I was able to get two sewn in a few hours.

Open Out Box Pouch Pair

The pouch with the llamas is the one I was making for myself, so I did each step on it before working on the second pouch.  That way I was hopefully making any mistakes on my own pouch instead of the one I was planning to gift.  The matching zipper helped hide some of the first-time-making-a-pattern-awkwardness! For the folded tab, I chose cork for both bags.

Llama Open Out Box Pouch

This bag looks similar to a lot of zippered pouches at first glance, but this one has a separating zipper that allows the bag to open into a boxed shape.  It is great to be able to see everything in the bag, and it sits open without any effort.  Inserting the gusset was a little tricky, but after trying one, the next went really smoothly.

Llama Open Out Box Pouch open

For the second pouch I chose a triangle print in a blue ombre with green lining and orange zipper.  Blue and orange is my favorite complementary color scheme!  This pouch ultimately became part of the gift exchange at the holiday party for one of my guilds, and I think it went to a good home!

Triangle Print Open Out Box Pouch

Triangle Print Open Out Box Pouch open

Road Trip Case

This year for the Central Ohio Modern Quilt Guild we did an end of the year gift swap with a mix of  handcrafted and purchased items.  We drew names at the November Meeting, and the person I chose had been eying the Road Trip Case by Noodlehead.  My partner likes Autumnal colors and Alison Glass designs, so I selected a palette  of her batiks and prints.

Road Trip Case Exterior

There are several different pockets and pieces of trim, so it was fun to choose where each fabric would go.  The pattern suggests batting for the quilted case exterior, but I switched it out for Soft and Stable foam, and I’m really pleased with the result.  I incorporated a few lines of walking foot quilting on the exterior using 28wt Aurifil.

Road Trip Case Interior

There are two options for the fabric pockets in the bag; two long or four short.  I wasn’t sure which to go with, but I ended up choosing the shorter pockets since it will most likely be used for sewing notions.  The pocket flaps with hook and loop tape (velcro) closures seemed useful to help contain smallish notions.  I often don’t care for hook and loop tape closers since the hook side can pick up so much fuzz.  I briefly considered replacing the tape with magnetic snaps.  Ultimately, I decided that the velcro allowed more leeway in where the pocket flap could close depending on how full the pocket was.  Hopefully it will work for my partner!

Road Trip Case Pocket detail

The case itself went together fairly easily, and I’m sure if I were to make more it would go quite quickly.  Like most bags, I felt like it took as long to cut out and interface the pieces, as it did to do the actual construction.  The vinyl pocket has the potential to be finicky, but I was pleased how well my machine handled this fabric especially since I don’t have a teflon foot.  I didn’t even end up needing to lay tissue paper over the vinyl while sewing.

The Road Trip Case looks like a great bag for small sewing projects, and would be a fabulous art kit for kids.  This would definitely make a fabulous holiday gift!

Travel Bag

This week will be my first Quilt Con, and to mark the occasion I made a new carry on bag.

Carry on Bag for QuiltCon 2016 front view

I drew up this pattern to work with a fat quarter bundle that I had of Tula Pink’s Elizabeth line along with some denim scraps that I had from another project.  The effect is unified, yet scrappy.  The front and back of the bag are identical with a zipper pocket and an open pocket behind it.  Behind each zipper pocket is a section of coordinating fabric that was pieced in to help stretch the main bag fabric.Carry on Bag for QuiltCon side view

The bag is quilted in sections to allow all of the raw edges to be enclosed as the bag came together.  The final construction seams attach the bag front and back to the side panel.  These seams are stitched with the seam allowances toward the exterior of the bag which will help to give a bit of extra structure to this soft case.  The raw edges are enclosed using a custom made bias tape from one of the striped fat quarters in the Tula Pink bundle.Carry On Bag for QuitlCon Interior

I am excited to take this bag on its inaugural voyage this week so I will have a better idea of what adjustments I should make if I were to create this design again.  If you are at QuiltCon, I hope to have a chance to meet you and perhaps exchange buttons!QuiltCon 2016 Buttons

Goal #8 is Complete!

Goal #8 is Complete!