Vinyl Front Tula Pouch

For the second year, one of the sewing groups I belong to did a swap.  This swap has a twist:  Each person brings a fat quarter of a favorite fabric from their stash to put in a bag.  Then, we all take turns pulling out a piece of fabric and guess who it belongs to.  We are a small group, so we are typically pretty successful in guessing the owner of the fabric.  We each take the fabric away and come back a couple meetings later with an item made from the fabric we pulled from the bag to give back to the original person.

Tula Vinyl Pouch front

I pulled this cute Tula Pink cat print from the bag of fat quarters.  It happened to be a fabric that I love enough to own, too!  The person who brought the fabric enjoys hand applique and embroidery, so I thought she may like a bag that will keep all of her pieces flat and visible until it is their turn to be secured to the block.

I used a fairly heavy, clear vinyl for the front of the pouch. The primary fabric is the cat print, and for the back of the pouch, I chose to make a nine patch from a charm pack from the same Tula Pink fabric line.  I sandwiched and quilted the fabric layers with a piece of soft and stable to make sure the pouch would lay flat while maintaining flexibility.

Tula Vinyl Pouch back

The binding is also from that same line of prints.  I machine stitched it to the front and folded it around to the back for hand stitching.  This allowed for hand finishing on the fabric portion of the pouch.  The bag finishes a bit over 13″ square, so a lot of quilt blocks could actually lay flat in the pouch.  I wish I had made one for myself when I was in a couple of bees- it would have been perfect to transport blocks!

Road Trip Case

This year for the Central Ohio Modern Quilt Guild we did an end of the year gift swap with a mix of  handcrafted and purchased items.  We drew names at the November Meeting, and the person I chose had been eying the Road Trip Case by Noodlehead.  My partner likes Autumnal colors and Alison Glass designs, so I selected a palette  of her batiks and prints.

Road Trip Case Exterior

There are several different pockets and pieces of trim, so it was fun to choose where each fabric would go.  The pattern suggests batting for the quilted case exterior, but I switched it out for Soft and Stable foam, and I’m really pleased with the result.  I incorporated a few lines of walking foot quilting on the exterior using 28wt Aurifil.

Road Trip Case Interior

There are two options for the fabric pockets in the bag; two long or four short.  I wasn’t sure which to go with, but I ended up choosing the shorter pockets since it will most likely be used for sewing notions.  The pocket flaps with hook and loop tape (velcro) closures seemed useful to help contain smallish notions.  I often don’t care for hook and loop tape closers since the hook side can pick up so much fuzz.  I briefly considered replacing the tape with magnetic snaps.  Ultimately, I decided that the velcro allowed more leeway in where the pocket flap could close depending on how full the pocket was.  Hopefully it will work for my partner!

Road Trip Case Pocket detail

The case itself went together fairly easily, and I’m sure if I were to make more it would go quite quickly.  Like most bags, I felt like it took as long to cut out and interface the pieces, as it did to do the actual construction.  The vinyl pocket has the potential to be finicky, but I was pleased how well my machine handled this fabric especially since I don’t have a teflon foot.  I didn’t even end up needing to lay tissue paper over the vinyl while sewing.

The Road Trip Case looks like a great bag for small sewing projects, and would be a fabulous art kit for kids.  This would definitely make a fabulous holiday gift!

Overlay: A Riley Blake Challenge Quilt

Overlay is the quilt I created using the Rockstar line from Riley Blake fabrics for the Modern Quilt Guild challenge last Spring.

Overlay front view

I focused on the red and white prints because I liked the idea of using such a classic color combination (such as the popular red & white quilt exhibition!) in contemporary prints.  The design of the quilt also embraced the juxtaposition of classic and contemporary.  The first step for this project was to make a traditional quilt top using a Flock of Geese block.

Assembled Blocks for Overlay

Once the top was complete, I started deciding which areas would be obstructed by the circular overlays.  To assist with this process, I made circles from printer and craft paper so I could experiment with scale.

Overlay Placement 1

Overlay Placement 2

Once the right scale was achieved, I used the paper pieces as templates to cut the fabric pieces.

Overlay Placement 3

After determining the final layout, I cut corresponding circles from quilt top that had a radius 1/2″ smaller.  Then I machine pieced in the circles- thats right- there is NO APPLIQUÉ in this quilt!

For me, the quilting is where my vision really comes to life.  I wanted the texture to tell the story of the quilt even in the sections where the overall pattern is obscured by the circles.  For example- if you were to paint a mural on a brick wall, the color changes with the design, but the underlying texture remains the same.  In this quilt, the Flock of Geese design is carried through the entire quilt top using the quilting.

Overlay front detail

Where the white portions of the Flock of Geese block would fall, vertical matchstick quilting is used. In the red areas, organic mixed motif quilting is used.  The thread color matches each fabric used on the front of the quilt.

Overlay Back

The back of the quilt is a mix of red, white, and aqua Riley Blake fabrics.  A facing finishes the edges of the quilt so there is no visual border trying to contain the circles that appear to float off the edge.

Overlay Back Detail

On the back of the quilt, you can really see some of the thread color changes that blend in on the front of the quilt.

I was able to enter this quilt into the county fair, and it received a first place and a best of division award!

Overlay County Fair

Quilt Stats:

Title:  Overlay

Size: 47″ x 63″

Techniques:  Machine Piecing

Quilting:  Matchstick and Mixed Motif Free-motion Quilting using an A-1 Longarm

Fabric:  Riley Blake Rockstar Prints and solids on the front, assorted Riley Blake fabrics on the back

Batting:  Hobbs 80/20

Thread:  Pieced using Gutermann Mara 100, Quilted with 50wt Aurifil in three colors to match the fabrics used

Binding:  Facing in coordinating Riley Blake prints

This quilt was entered into QuiltCon 2018

Ornament Swap

An ornament swap was one of the activities the Columbus Modern Quilters scheduled for our meeting in late November.  The only rule was that our ornament must include fabric someplace in the construction.

Never one for a purely traditional color scheme, I used pink and green as the dominant colors.  The ornament was made from a large styrofoam ball that I wrapped in narrow bias cut strips of low volume white and a pink Tula Pink print, which hopefully gave it a bit of a peppermint vibe.  Lime green grosgrain serves as the hanger for the ornament, and is held in place with a few drops of glue.  (I hardly ever combine glue with fabric, but I’ll make an exception for something like this with light use that will never need washing.)

Peppermint Ornament

We were not assigned a partner ahead of time.  Instead we all wrapped our ornaments and did a version of a “bad Santa” exchange.  No two ornaments were the same.  We had a couple variations of fabric scraps enclosed in glass or plastic bulbs, some embroidered pieces, and some fabulously done fabric folding.  I absolutely love the one I received!  The feather piecing is gorgeous, and I’ll be able to display it in my sewing space all year round!

Feather Ornament

Entries for QuiltCon 2018

QuiltCon 2018 is coming up in February, and Thursday was the last day for entries.  I always end up having one quilt that I either:

1) Have to make by the deadline – or

2) Allow to grow from a small project to a big one.

My Michael Miller Challenge quilt was definitely the second.  It was going to be a small-ish wall quilt, but it ended up being a generous lap quilt at 63″x69″.

Complementary Composition full

“Overlay” is my second entry and is entered in the Modern Traditionalism category.  This was also my entry in the Riley Blake Challenge earlier this year.  I really hope this one gets in- it is a personal favorite!

Overlay full

For my negative space entry, I continued exploring the idea of highlighting the use of thread to tell the story of the design.

Pivoted Plaid full

“Lateral Ascension” is entered in the Minimalism category.  The design is inspired by the drafted front elevation of a spiral staircase.

Lateral Ascension full

Franklin Park/Greenery in the Garden” is the only quilt I have actually written a more in depth post about.  It is entered into the Improvisational category.

Franklin Park full

Even though there is now a maximum number of five quilts accepted per entrant, I couldn’t resist adding a sixth entry.  I would love to share it with you, but it is a piece of secret sewing, so I will have to wait (and so will you!)

I have been away from the blog for awhile, and I am really missing it.  In the hopes of encouraging myself to make it more of a habit to blog, I am going to try participating in the 31 Day Blog Challenge hosted by Cheryl Sleboda at muppin.com.

BlogChallengeYr3-1